PRODUCT INFORMATION
Product Overview
The Bently Nevada TK-3E TK3 Proximity System Test Kit provides electrically driven calibration for proximity sensor systems. This test unit verifies vibration transducers and monitor loop scaling across field instrumentation. It operates on 95 to 125 VAC or 190 to 250 VAC power at 50/60 Hz. Each operational voltage range requires a minimum current of 1 A.
The unit generates dynamic signals with a vibration amplitude range of 50 to 254 μm peak-to-peak. Rotational speed output spans from 0 to 5000 cpm with an accuracy tolerance of 1000 cpm. Its protective casing delivers an IP54 exposure rating when closed against dust and water entry. Field engineers use the portable kit within operating temperatures between 0 °C and 50 °C.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Power Requirements | 95–125 VAC, 50/60 Hz, 1A minimum 190–250 VAC, 50/60 Hz, 1A minimum |
|---|
| Vibration Amplitude Range | 50 μm to 254 μm (2 to 10 mils) peak-to-peak |
|---|
| Maximum Speed | 0 to 5000 cpm ± 1000 cpm |
|---|
| Height | 195 mm (7.68 in) |
|---|
| Width | 299 mm (11.8 in) |
|---|
| Depth | 248 mm (9.76 in) |
|---|
| Weight | 5.22 kg (11.5 lb) |
|---|
| Operating Temperature | 0 °C to 50 °C (32 °F to 122 °F) |
|---|
| Storage Temperature | -18 °C to 65 °C (0 °F to 150 °F) |
|---|
| Humidity | 95% non-condensing |
|---|
| Exposure Rating | IP54 (dust and water resistant when closed) |
|---|
TECHNICAL INFORMATION
Features
- Electrically driven motor assembly delivers adjustable speeds from 0 to 5000 cpm.
- Supports dynamic vibration amplitude generation from 50 μm to 254 μm peak-to-peak.
- Dual-range power input accommodates 95–125 VAC and 190–250 VAC electrical supplies.
- IP54-rated protective case design resists water and dust intrusion when closed.
- Operates across environmental temperatures spanning 0 °C to 50 °C.
TECHNICAL INFORMATION
Applications
- Proximity probe system calibration and verification in machinery protection loops.
- Field verification of peak-to-peak vibration amplitude readings on monitoring systems.
- Routine maintenance inspection of industrial vibration instrumentation.
TECHNICAL INFORMATION
Installation Guidelines
- Connect the test kit to an appropriate 95–125 VAC or 190–250 VAC power source.
- Keep the protective enclosure lid fully closed during transport to preserve IP54 ingress protection.
- Operate the equipment only within the specified 0 °C to 50 °C temperature range.
TECHNICAL INFORMATION
Compliance and Certifications
- IP54 ingress protection rating when closed
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the Bently Nevada TK-3E?
The TK-3E is an electrically driven test kit for calibrating and verifying proximity vibration sensor systems.
What power supply does the TK-3E require?
It requires 95 to 125 VAC or 190 to 250 VAC at 50/60 Hz with 1 A minimum current.
What vibration amplitude range does the kit produce?
The kit generates peak-to-peak vibration amplitudes from 50 μm to 254 μm, or 2 to 10 mils.
What is the environmental rating of the TK-3E enclosure?
The unit features an IP54 exposure rating when closed, protecting internal components against dust and water ingress.
