PRODUCT INFORMATION
Product Overview
The General Electric DS200PTBAG1A is a Protection Termination Module for Mark V turbine control systems. This board operates within Speedtronic automated control architectures managing industrial steam and gas turbines. It features standard printed circuit board coating to guard against daily operational wear and tear. The module connects with related Mark V boards including TCEB and TCTG assemblies.
The assembly provides dual terminal blocks designated TB1 and TB2. Each terminal block accommodates up to 72 field signal wire connections. The hardware layout also includes three 10-pin ribbon cable connectors named JJR, JJT, and JJS. Six signal wire terminal posts and corner mounting holes complete the physical design. An onboard jumper manages the integrated audible alarm horn during process alert events.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Product Number | DS200PTBAG1A |
|---|
| Unused Connectors | JJS/T Connector |
|---|
| Mark V Series Grouping | Group 1 |
|---|
TECHNICAL INFORMATION
Features
- Dual 72-point terminal blocks designated TB1 and TB2 for field signal termination.
- Three 10-pin communication headers labeled JJR, JJT, and JJS.
- Integrated audible warning horn controlled by a removable hardware jumper.
- Six dedicated signal wire terminal posts for secondary wiring interfaces.
- Protective printed circuit board coating applied across the surface assembly.
TECHNICAL INFORMATION
Applications
- General Electric Mark V Speedtronic gas turbine control assemblies.
- General Electric Mark V Speedtronic steam turbine control systems.
TECHNICAL INFORMATION
Connections / Interfaces
- Terminal block TB1 supports up to 72 field signal wire connections.
- Terminal block TB2 supports up to 72 field signal wire connections.
- Three 10-pin ribbon headers labeled JJR, JJT, and JJS interface with internal cabling.
- Dedicated terminal posts accept up to 6 discrete signal wire terminations.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the board using the four corner attachment holes fitted into the drive rack.
- Document all field wiring and ribbon cable assignments before removing any active board.
- Label individual conductors using the block and terminal number such as TB1-27 or TB2-70.
- Match wire markers directly to the corresponding terminal IDs during replacement.
TECHNICAL INFORMATION
Configuration Guidelines
- A manually movable hardware jumper controls the onboard audible horn.
- Remove the hardware jumper completely to silence the audible alarm horn.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Mark V Speedtronic control systems.
- Functions alongside Mark V system boards designated TCEB and TCTG.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Mark V Speedtronic control systems. Functions alongside Mark V system boards designated TCEB and TCTG.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the General Electric DS200PTBAG1A?
The DS200PTBAG1A handles protection termination and field wiring routing for Mark V turbine control systems.
How is the onboard horn silenced on the DS200PTBAG1A module?
Technicians silence the onboard horn by completely removing the manually movable hardware jumper.
What connection blocks are present on the DS200PTBAG1A board?
The board features two 72-terminal blocks labeled TB1 and TB2, plus three 10-pin headers.
What are the physical dimensions and mounting provisions for the DS200PTBAG1A?
The board measures 3 inches high by 11.5 inches wide with four corner mounting holes.
