PRODUCT INFORMATION
Product Overview
The General Electric DS200SDCIG2AGB is a Mark V power supply and instrumentation board. This circuit board provides an interface for DC2000 drives across automated drive assemblies. It serves control systems managing gas, steam, and wind turbine installations. The unit incorporates standardized Mark V voltage-limiting resistors, capacitors, and diodes for suppression.
This assembly is a revised version of the original DS200SDCIG2 parent printed circuit board. It includes three factory product revisions to improve instrumentation and power conversion performance. Configurable hardware elements include jumper JP1, jumper JP2, and a multi-position switch SW1. The board features standard normal PCB coating and operates in turbine control cabinets.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Instruction Manual | GEI-100173 |
|---|
| PCB Coating | Normal Coating |
|---|
| Weight | 1 lb |
|---|
TECHNICAL INFORMATION
Features
- Interfaces directly with General Electric DC2000 drive systems.
- Includes onboard voltage-suppression circuitry with resistors, capacitors, and diodes.
- Features JP1 MD control source selector jumper.
- Includes JP2 MA AC contactor drop-out time selector jumper.
- Provides SW1 switch to select AC line CT burdens by nominal DC current.
- Protected with normal printed circuit board protective coating.
TECHNICAL INFORMATION
Applications
- General Electric Mark V gas turbine drive management systems.
- Steam turbine automated control assemblies.
- Wind turbine automated drive management systems.
- Interface connections for DC2000 drive cabinets.
TECHNICAL INFORMATION
Connections / Interfaces
- Integrates direct wiring connections for DC2000 drive cabinets.
- Connects to turbine instrumentation circuits using multi-conductor board cabling.
TECHNICAL INFORMATION
Installation Guidelines
- Turn off all electric current feeding the drive completely before opening cabinets.
- Consult official drive documentation for complete power isolation instructions.
- Test every circuit to confirm zero electrical energy.
- Wait several seconds for internal capacitors to dissipate stored electrical current.
- Tilt the forward-mounted circuit board forward to access the DS200SDCIG2AGB.
- Label and detach all wire cables carefully before unfastening the board.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure jumper JP1 to establish the MD control source setting.
- Set jumper JP2 to adjust MA AC contactor drop-out timing.
- Adjust switch SW1 for AC line CT burdens based on nominal DC output current.
- Verify model and catalog markings on the board edge against original specifications.
TECHNICAL INFORMATION
Compatibility
- Engineered for General Electric Mark V turbine control system racks.
- Compatible with General Electric DC2000 drive assemblies.
- Documented in instruction manual GEI-100173.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSEngineered for General Electric Mark V turbine control system racks. Compatible with General Electric DC2000 drive assemblies. Documented in instruction manual GEI-100173.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary role of the DS200SDCIG2AGB board?
The DS200SDCIG2AGB functions as a DC power supply and instrumentation interface board for DC2000 drives.
Which technical instruction manual covers the DS200SDCIG2AGB?
The board is documented in General Electric instruction manual GEI-100173.
What hardware jumpers are adjustable on the DS200SDCIG2AGB?
The board includes jumper JP1 for MD control source and jumper JP2 for contactor drop-out timing.
What safety precautions are required before replacing the board?
Disconnect all drive power completely, verify zero voltage with meters, and allow capacitor current to dissipate.
