PRODUCT INFORMATION
Product Overview
The General Electric IC694MDL241 is a sixteen-point discrete input module for the PACSystems RX3i platform. This module operates with both 24 VAC and 24 VDC control signals across industrial field circuits. It supports alternating current frequencies ranging from 50 Hz to 60 Hz. Both positive logic and negative logic wiring configurations are supported by the input circuitry.
Backplane current consumption is rated at 80 mA at 5 VDC and 125 mA at 24 VDC. The unit is rated for operating and storage humidity between 0 and 80 percent non-condensing. Permissible installation altitude reaches up to 1000 meters above sea level. The physical module weighs approximately 0.94 lbs, which equals 0.43 kg.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 0.94 lbs (0.43 kg) |
|---|
| UPC | 0 913170302679 |
|---|
| Input Voltage AC | 24 VAC |
|---|
| Input Voltage DC | 24 VDC |
|---|
| Number of Points | 16 Points |
|---|
| Minimum Frequency | 50 Hz |
|---|
| Maximum Frequency | 60 Hz |
|---|
| Logic Type | Positive/Negative Logic |
|---|
| Current Consumption | 80 mA @ 5 VDC & 125 mA @ 24 VDC |
|---|
| Storage Humidity | 0 to 80 % (Non-Condensing) |
|---|
| Installation Altitude | 1000 MSL |
|---|
| Operating Humidity | 0 to 80 % (Non-Condensing) |
|---|
TECHNICAL INFORMATION
Features
- Accommodates 16 discrete input points for simultaneous field signal processing.
- Operates with dual voltage capability supporting 24 VAC and 24 VDC circuits.
- Compatible with standard industrial power frequencies between 50 Hz and 60 Hz.
- Configurable for both positive logic and negative logic field wiring.
- Draws 80 mA at 5 VDC and 125 mA at 24 VDC backplane power.
TECHNICAL INFORMATION
Applications
- Discrete sensing and push-button interfacing in PACSystems RX3i control architectures.
- Interfacing standard 24 VAC or 24 VDC pilot devices and limit switches.
TECHNICAL INFORMATION
Connections / Interfaces
- Provides sixteen discrete input channels for external sensor and switch connections.
- Accommodates positive or negative logic wiring across field device circuits.
TECHNICAL INFORMATION
Installation Guidelines
- Install the module in a compatible PACSystems RX3i backplane slot.
- Maintain operating humidity between 0 and 80 percent non-condensing.
- Ensure the installation altitude does not exceed 1000 meters above sea level.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric PACSystems RX3i backplanes and controllers.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric PACSystems RX3i backplanes and controllers.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What voltage ratings does the IC694MDL241 input module support?
The IC694MDL241 supports both 24 VAC and 24 VDC inputs. It accommodates AC power frequencies from 50 Hz to 60 Hz.
What is the backplane current draw for the IC694MDL241?
The module consumes 80 mA at 5 VDC. It also draws 125 mA at 24 VDC from the backplane.
Does the IC694MDL241 support sink and source wiring?
Yes, the module supports both positive and negative logic configurations for connected field inputs.
What environmental limits apply to the IC694MDL241?
Operating humidity is rated from 0 to 80 percent non-condensing. Maximum installation altitude is 1000 meters.
