PRODUCT INFORMATION
Product Overview
The General Electric IC697MDL341 is a Series 90-70 discrete output module. It provides 12 isolated output points operating at 120 to 240 Volts AC. The isolated design permits the use of different phases across the AC power supply. Each output point delivers a continuous current capacity of 2 Amps. A high inrush capability handles surge currents up to 10 times the rated current. This design supports incandescent and inductive loads.
Internal heat dissipation limits the total module current to 16 Amps. Each individual circuit includes a replaceable fuse rated at 3.15 Amps. Integrated LED indicators display the on and off status for every point. A dedicated fuse LED illuminates if any circuit fuse opens. The module features mechanical keying for correct slot replacement. Software configuration eliminates the need for physical DIP switches or jumpers.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 2.44 lbs (1.11 kg) |
|---|
| Rated Voltage | 120/240 V AC |
|---|
| Outputs | 12 |
|---|
| Output Current/Point | 2 A |
|---|
| Output Current/Module | 16 A |
|---|
| Current Required | 0.25 A |
|---|
| Frequency | 47-63 Hz |
|---|
| DC Power | No |
|---|
| AC Power | Yes |
|---|
| LED Indicators | Yes |
|---|
TECHNICAL INFORMATION
Features
- Provides 12 isolated AC output points rated for 120 to 240 Volts AC.
- Supports continuous current capacity of 2 Amps per point.
- Handles inrush currents up to 10 times rated current for inductive loads.
- Limits total module current to 16 Amps to control thermal dissipation.
- Includes individual replaceable 3.15 Amp fuses for each output point.
- Features status LEDs for all logic outputs and blown fuse indication.
- Enables software configuration without hardware jumpers or DIP switches.
TECHNICAL INFORMATION
Applications
- Control of industrial solenoids and motor starters.
- Switching AC indicator lamps and incandescent panels.
- Multi-phase AC load management in Series 90-70 control systems.
TECHNICAL INFORMATION
Connections / Interfaces
- Terminal connections support 12 isolated AC load circuits.
- Isolated channels allow wiring to separate AC supply phases.
TECHNICAL INFORMATION
Installation Guidelines
- Insert the module into any compatible Series 90-70 I/O slot.
- Mechanical keying prevents insertion of incorrect module types.
- Ensure total operating load across all points does not exceed 16 Amps.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure I/O point references entirely through system programming software.
- No DIP switches or jumpers are required for address assignment.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Series 90-70 PLC racks.
- Switches AC loads including solenoids, indicators, and motor starters.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Replace blown point fuses using 3.15 Amp rated replacement fuses.
- Automatic keying maintains replacement consistency across field units.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Series 90-70 PLC racks. Switches AC loads including solenoids, indicators, and motor starters.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the voltage rating of the IC697MDL341?
The module operates at a rated voltage of 120 to 240 Volts AC at 47 to 63 Hz.
How many outputs does the GE IC697MDL341 provide?
The module provides 12 isolated discrete AC output points.
What is the maximum current capacity per output point and module?
Each point supports up to 2 Amps. The total module current is limited to 16 Amps.
How are blown fuses identified on the IC697MDL341?
The module includes a dedicated LED indicator that illuminates if any fuse blows.
