PRODUCT INFORMATION
Product Overview
The General Electric IS200SHRAH2A is a HART Enabled Analog Input/Output Board for the Mark VI / Mark VIe series. This board accepts ten analog inputs and two analog outputs. It interfaces field instrumentation with corresponding PHRA and YHRA I/O packs. The unit connects to the system assembly using an integrated D-type connector.
Communication with the greater controller assembly occurs over an Ethernet network. Hardware mounting includes a plastic holder and a sheet metal carrier designed for DIN rail installation. The printed circuit board features a protective conformal coating. Twenty labeled jumpers allow hardware selection between voltage or current input modes and return connections.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| PCB Coating | Conformal Coating |
|---|
| Hart Status | HART Enabled |
|---|
| I/O Pack | PHRA I/O Pack |
|---|
| Mark VIe Series Mount | DIN Rail Mounting Strategy |
|---|
TECHNICAL INFORMATION
Features
- Accepts ten analog inputs and two analog outputs for field instrumentation.
- Enables Highway Addressable Remote Transducer communication for connected field devices.
- Interfaces directly with Mark VIe PHRA and YHRA I/O packs.
- Includes a D-type connector for direct connection to the pack assembly.
- Features twenty labeled jumpers for voltage, current, or return-to-common configuration.
- Equipped with a right-angle header designed for high-density Euro-block terminal wiring.
- Protected by a conformal coating applied to the printed circuit board.
TECHNICAL INFORMATION
Applications
- Mark VIe control system architectures requiring analog signal processing.
- Instrumentation loops utilizing Highway Addressable Remote Transducer protocol communications.
- Analog input and output integration with PHRA or YHRA I/O packs.
TECHNICAL INFORMATION
Connections / Interfaces
- One D-type connector connects directly to the I/O pack assembly.
- A right-angle header accepts high-density Euro-block wiring connections.
- Ethernet communications interface with the greater controller assembly.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the board assembly onto a DIN rail using the sheet metal carrier.
- Ensure the plastic holder secures the printed circuit board properly.
- Engage the D-type connector firmly into the matching pack interface.
TECHNICAL INFORMATION
Configuration Guidelines
- Inspect the twenty labeled hardware jumpers before installing the board.
- Configure jumper positions to select voltage or current input modes.
- Set jumpers to establish return-to-common connections per channel wiring specifications.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Mark VIe controller assemblies.
- Designed to interface directly with PHRA and YHRA I/O packs.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Mark VIe controller assemblies. Designed to interface directly with PHRA and YHRA I/O packs.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the function of the IS200SHRAH2A board?
The IS200SHRAH2A processes ten analog inputs and two analog outputs while supporting HART transducer communication.
How does the IS200SHRAH2A interface with the control system?
The unit plugs into the assembly with a D-type connector and communicates via Ethernet.
How are input channel signal modes selected on the board?
Twenty labeled jumpers allow manual selection between voltage input, current input, or return-to-common routing.
What mounting hardware is provided with the IS200SHRAH2A?
The board includes a plastic holder and a sheet metal carrier for DIN rail mounting.
