PRODUCT INFORMATION
Product Overview
General Electric IS215VCMIH2CA is a VME Communications Interface designed for Mark VI turbine control systems. The board manages communication between the system controller and rack I/O boards. It also coordinates data transfer with the Mark VI IONet system network. The base assembly belongs to product group 2 with conformal coating protection.
The IS215VCMIH2CA represents a revised iteration of the baseline IS215VCMIH2 circuit board. It incorporates two factory functional revision levels designated as C and A. The unit installs directly into a compatible VME card rack. The front faceplate provides fourteen status and diagnostic LED indicators.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| GE Mark Series | Mark VI Speedtronic |
|---|
| PCB Coating Type | Conformal Coating |
|---|
TECHNICAL INFORMATION
Features
- Acts as the communication interface between Mark VI controllers and local I/O boards.
- Supports network links to the system IONet turbine control communications network.
- Provides conformal coating on circuit board components for environmental protection.
- Incorporates fourteen diagnostic LED indicators across the front panel.
- Includes dedicated LEDs for TX, RX, CD, RUN, FAIL, STATUS, and RESET signals.
- Features four MODULE LEDs and three EST status indicators on the faceplate.
- Applies functional revisions C and A over the baseline IS215VCMIH2 hardware design.
TECHNICAL INFORMATION
Applications
- General Electric Mark VI Speedtronic turbine control system rack assemblies.
- Interface communication between Mark VI controller modules and local I/O cards.
- Data routing into the IONet turbine control communications network.
TECHNICAL INFORMATION
Connections / Interfaces
- Connects directly to the Mark VI system controller and associated I/O modules.
- Interfaces with the high-speed IONet turbine control communications network.
- Integrates via backplane connectors within the Mark VI VME card rack.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the board into the designated VME card rack slot within the turbine cabinet.
- Ensure the control rack power is off prior to inserting or removing the board.
- Verify that the front faceplate screws are secured to maintain chassis grounding.
TECHNICAL INFORMATION
Compatibility
- Compatible with GE Mark VI Speedtronic turbine control systems and VME racks.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with GE Mark VI Speedtronic turbine control systems and VME racks.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the IS215VCMIH2CA board?
The board coordinates data flow between Mark VI controllers, I/O boards, and the IONet network.
What diagnostic LEDs are present on the IS215VCMIH2CA faceplate?
The faceplate has fourteen LEDs including MODULE, EST, TX, RX, CD, RUN, FAIL, STATUS, and RESET.
What coating protection does the IS215VCMIH2CA possess?
The printed circuit board components feature conformal coating, while the faceplate remains untreated metal.
