PRODUCT INFORMATION
Product Overview
The ABB DI810 3BSE008508R1 Digital Input Module is part of the ABB S800 I/O family. This module interfaces digital field signals directly with ABB Advant and System 800xA controllers. It provides sixteen input channels arranged into two galvanically isolated groups of eight channels each. The unit operates with nominal 24 V DC control circuits.
Engineers install the module on standard S800 Module Termination Units to route field wiring. Each channel draws approximately 6 mA at 24 V DC. The hardware accepts an operating voltage range from 15 V DC to 30 V DC. This compact unit simplifies installation within process control cabinets.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Number of Channels | 16 channels (2 isolated groups of 8) |
|---|
| Nominal Input Voltage | 24 V DC |
|---|
| Input Voltage Range | 15 V DC to 30 V DC |
|---|
| Input Current at 24 V DC | Approx. 6 mA per channel |
|---|
| Group Isolation Rating | 50 V |
|---|
| Module Dimensions (W x H x D) | 45 mm x 119 mm x 102 mm (1.77 in x 4.69 in x 4.01 in) |
|---|
| Product Platform | S800 I/O |
|---|
| System Compatibility | ABB Ability System 800xA / Advant OCS |
|---|
TECHNICAL INFORMATION
Features
- Sixteen digital input channels arranged in two isolated groups of eight.
- Rated for 24 V DC nominal digital input signals.
- Input operating voltage window spans from 15 V DC to 30 V DC.
- Input current consumption is approximately 6 mA per channel at 24 V DC.
- Rated isolation voltage of 50 V between channel groups.
- Compact 45 mm DIN-rail mountable form factor.
TECHNICAL INFORMATION
Applications
- Field switch state detection in ABB System 800xA control systems.
- Digital signal acquisition for ABB Advant industrial automation networks.
- Process monitoring of auxiliary contacts, pushbuttons, and limit switches.
TECHNICAL INFORMATION
Connections / Interfaces
- Mounts onto compatible S800 Module Termination Units.
- Field wiring connects through termination block terminals on the MTU base.
- Internal backplane bus interface establishes communication with the I/O cluster modem.
TECHNICAL INFORMATION
Installation Guidelines
- Snap the module onto an approved S800 Module Termination Unit.
- Ensure panel power is disconnected before seating or removing the module.
- Maintain standard ventilation clearances inside the control cabinet enclosure.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure module channel parameters within the ABB engineering station environment.
- Assign channel tags according to the system I/O mapping documentation.
TECHNICAL INFORMATION
Compatibility
- Compatible with Module Termination Units TU810, TU812, TU814, and TU818.
- Compatible with Module Termination Units TU830, TU833, TU838, and TU850.
- Designed for use within ABB S800 I/O communication clusters.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with Module Termination Units TU810, TU812, TU814, and TU818. Compatible with Module Termination Units TU830, TU833, TU838, and TU850. Designed for use within ABB S800 I/O communication clusters.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
How many channels does the ABB DI810 3BSE008508R1 support?
The module supports sixteen digital input channels configured as two isolated groups of eight channels.
What is the operating voltage range for DI810 inputs?
The nominal voltage is 24 V DC, with an operational input range spanning 15 V DC to 30 V DC.
Which termination units are compatible with the DI810 module?
The DI810 mounts on termination units TU810, TU812, TU814, TU818, TU830, TU833, TU838, and TU850.
What is the indicative market price for the ABB DI810 3BSE008508R1?
Market observations show an indicative price around 239 USD. Figures represent indicative market reference pricing only and are not a final quotation.
