PRODUCT INFORMATION
Product Overview
The ABB CI801 3BSE022366R1 Communication Interface Module connects distributed S800 I/O clusters to AC800M controllers. It communicates over industry-standard PROFIBUS-DPV1 fieldbus networks. The module operates as a dedicated PROFIBUS DP-V1 slave unit.
This interface manages signal processing, module supervision, and Output Set as Predetermined functions. It supports Hot Configuration In Run and HART pass-through data transfer. The hardware features IP20 protection and ISA-S71.04 G3 corrosion resistance.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Communication protocol | PROFIBUS DP-V1 |
|---|
| Master or slave | Slave |
|---|
| Line redundancy | No |
|---|
| Module redundancy | No |
|---|
| Hot Swap | No |
|---|
| Used together with HI Controller | Yes |
|---|
| 24 V consumption typ. | 140 mA |
|---|
| CE- marking | Yes |
|---|
| Electrical Safety | EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201 |
|---|
| Hazardous location | C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 |
|---|
| Marine certificates | ABS, BV, DNV, LR, CCS |
|---|
| Temperature, Operating | 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C |
|---|
| Temperature, Storage | -40 to +70 °C (-40 to +158 °F) |
|---|
| Pollution degree | Degree 2, IEC 60664-1 |
|---|
| Corrosion protection | ISA-S71.04: G3 |
|---|
| Relative humidity | 5 to 95 %, non-condensing |
|---|
| Max ambient temperature | 55 °C (131 °F), for vertical mounting 40 °C (104 °F) |
|---|
| Protection class | IP20 according to EN60529, IEC 529 |
|---|
| RoHS compliance | EU RoHS, UAE RoHS, CN RoHS |
|---|
| WEEE compliance | DIRECTIVE/2012/19/EU |
|---|
| Width | 85.8 mm |
|---|
| Height | 136 mm, including latch |
|---|
| Depth | 58.5 mm |
|---|
| Weight | 0.3 kg |
|---|
TECHNICAL INFORMATION
Features
- Operates as a PROFIBUS DP-V1 slave communication interface.
- Executes localized signal processing and S800 I/O supervision.
- Supports Hot Configuration In Run and HART pass-through communication.
- Provides Output Set as Predetermined fault-handling capabilities.
- Qualified for use alongside High Integrity safety controllers.
- Resists severe environmental corrosion per ISA-S71.04 severity level G3.
TECHNICAL INFORMATION
Applications
- Distributed process automation architectures using S800 I/O hardware.
- Industrial fieldbus communication interfacing via PROFIBUS DP-V1.
- Hazardous industrial areas requiring Class I Division 2 or ATEX Zone 2 approval.
- Marine automation and monitoring systems requiring classification society certifications.
TECHNICAL INFORMATION
Connections / Interfaces
- Fieldbus connection interfaces directly to PROFIBUS DP-V1 networks.
- Internal bus links communication directly to adjacent S800 I/O modules.
- Requires an external 24 V DC power supply drawing 140 mA typically.
TECHNICAL INFORMATION
Installation Guidelines
- Install the unit in a clean cabinet providing IP20 protection.
- Observe ambient limit of 55 °C for standard horizontal mounting.
- Derate maximum ambient operating temperature to 40 °C when mounting vertically.
- Maintain non-condensing relative humidity between 5 and 95 percent.
- Do not remove or insert the module while power is applied.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure module operating parameters through compatible engineering station software.
- Set slave address and bus parameters per project PROFIBUS network schedules.
- Enable HART pass-through routing for connected smart field transmitters.
TECHNICAL INFORMATION
Compatibility
- Compatible with ABB AC800M controller platforms.
- Integrates directly with ABB High Integrity safety controllers.
- Connects and supervises standard S800 I/O module families.
TECHNICAL INFORMATION
Compliance and Certifications
- Electrical Safety: EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
- Hazardous Locations: Class I Div 2 cULus, Class I Zone 2 cULus, ATEX Zone 2
- Marine Standards: ABS, BV, DNV, LR, CCS
- Directives: CE marked, EU RoHS, UAE RoHS, CN RoHS, WEEE 2012/19/EU
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with ABB AC800M controller platforms. Integrates directly with ABB High Integrity safety controllers. Connects and supervises standard S800 I/O module families.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary role of the ABB CI801 3BSE022366R1?
The CI801 3BSE022366R1 serves as a PROFIBUS DP-V1 slave communication interface module for S800 I/O systems.
Does the CI801 communication interface support hot swapping?
No, the CI801 does not support hot swapping while the module station is energized.
Can the CI801 module be installed in hazardous locations?
Yes, it is certified for Class I Division 2, Class I Zone 2, and ATEX Zone 2 environments.
What is the observed market price for the CI801 3BSE022366R1?
Observed market reference pricing is approximately $887. This figure is an indicative market reference only and is not a final quotation.
