PRODUCT INFORMATION
Product Overview
The Allen-Bradley 1783-ETAP is a Stratix Ethernet/IP Network Tap designed for industrial network connectivity. This unit features three copper communication ports using standard RJ45 connectors. It operates at communication speeds of 10/100 Mbps for industrial automation networking. The network tap supports both linear and Device Level Ring network topologies.
Power requirements specify a 24V DC nominal supply with an operating range from 20.4 to 27.6V DC. The module draws a maximum current of 125 mA at 24V DC. Both maximum power consumption and power dissipation are rated at 3 watts. The hardware provides 30 volts of continuous isolation voltage. An open-style enclosure allows straightforward access for installation and maintenance.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| UPC | 612598349968 |
|---|
| Weight | 0.88 lbs (0.40 kg) |
|---|
| Number of Ports | 3 Copper Ports |
|---|
| Maximum Current Consumption Rating | 125 Milliamps at 24 Volts DC |
|---|
| DC Power Supply Voltage Rating | 24 Volts DC (20.4 to 27.6 Volts DC) |
|---|
| Isolation Voltage | 30 Volts (Continuous) |
|---|
| Maximum Power Consumption Rating | 3 Watts |
|---|
| Power Dissipation Rating | 3 Watts |
|---|
| Connector Type | RJ45 |
|---|
| Supported Network Topology | Linear and DLR |
|---|
| Ethernet Speed | 10/100 Mbps |
|---|
| Enclosure Type | Open-Style |
|---|
TECHNICAL INFORMATION
Features
- Three copper RJ45 Ethernet ports operating at 10/100 Mbps.
- Hardware support for linear and Device Level Ring (DLR) topologies.
- Nominal 24V DC power input with a 20.4 to 27.6V DC operating range.
- Low current consumption rated at 125 mA maximum at 24V DC.
- Maximum power dissipation and consumption rated at 3 watts.
- Provides 30 volts continuous isolation voltage.
- Open-style enclosure suitable for industrial control cabinets.
TECHNICAL INFORMATION
Applications
- Device Level Ring (DLR) industrial networking.
- EtherNet/IP network topology transitions and tapping.
- Linear Ethernet media connectivity within control systems.
TECHNICAL INFORMATION
Connections / Interfaces
- Three copper RJ45 ports for 10/100 Mbps Ethernet connections.
- Power terminal interface for 24V DC external power supply wiring.
TECHNICAL INFORMATION
Installation Guidelines
- Install the open-style module in a clean, dry, protected industrial enclosure.
- Verify the DC supply voltage is between 20.4 and 27.6V DC before powering the unit.
- Route and secure all RJ45 Ethernet cables to avoid physical strain.
TECHNICAL INFORMATION
Configuration Guidelines
- Connect network cables to form either a linear path or a Device Level Ring.
- Ensure connected nodes match the supported 10/100 Mbps data rates.
TECHNICAL INFORMATION
Compatibility
- Compatible with standard EtherNet/IP devices and networks.
- Interoperates with network nodes supporting linear and Device Level Ring architectures.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with standard EtherNet/IP devices and networks. Interoperates with network nodes supporting linear and Device Level Ring architectures.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What network topologies does the Allen-Bradley 1783-ETAP support?
The 1783-ETAP supports linear and Device Level Ring (DLR) network topologies across its three copper RJ45 ports.
What are the input power specifications for the 1783-ETAP?
The module requires a nominal 24V DC power supply with an acceptable input voltage range of 20.4 to 27.6V DC.
What is the maximum power consumption of the 1783-ETAP network tap?
The unit consumes up to 3 watts, drawing a maximum current of 125 milliamps at 24V DC.
