PRODUCT INFORMATION
Product Overview
The ABB CI854AK01 3BSE030220R1 is a PROFIBUS DP-V1 Communication Interface Module designed for the AC800M controller platform. It functions as a master interface module, managing fieldbus communication with decentralized peripherals. The unit also supports connection to PROFIBUS PA instruments via an external linking device.
This communication interface module operates directly on the AC800M CEX bus. Up to 12 interface modules can mount on a single controller CEX bus. The hardware provides two independent channels and supports speeds up to 12,000 kbit/s. It supports both cable redundancy and module redundancy. Online hot swapping is supported for maintenance without interrupting system operation.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Communication Protocol | PROFIBUS DP-V1 (PA via linking device) |
|---|
| Bus Role | Master |
|---|
| Number of Channels | 2 |
|---|
| Maximum Units on CEX Bus | 12 |
|---|
| Transmission Speed | 9.6 to 12,000 kbit/s |
|---|
| Cable Redundancy | Yes |
|---|
| Module Redundancy | Yes |
|---|
| Hot Swap Support | Yes |
|---|
| Fieldbus Connector | 9-pin female D-sub |
|---|
| Typical 24 V Current Consumption | 190 mA |
|---|
| Protection Class | IP20 (EN60529, IEC 529) |
|---|
TECHNICAL INFORMATION
Features
- Provides two independent fieldbus communication channels on a single module.
- Operates as a dedicated master interface for PROFIBUS DP-V1 networks.
- Supports connection to PROFIBUS PA field instruments through an external linking device.
- Supports online hot swapping without interrupting controller execution.
- Provides high-speed data transmission ranging from 9.6 to 12,000 kbit/s.
- Enables both line cable redundancy and module redundancy.
TECHNICAL INFORMATION
Applications
- AC800M automation architectures requiring distributed PROFIBUS DP-V1 slave communication.
- Process automation connections to remote I/O clusters and variable speed drives.
- Process instrumentation integration using PROFIBUS PA segments via linking devices.
TECHNICAL INFORMATION
Connections / Interfaces
- Two 9-pin female D-sub connectors for PROFIBUS fieldbus physical network lines.
- Direct connection to the AC800M communication expansion (CEX) bus.
TECHNICAL INFORMATION
Installation Guidelines
- Install module directly onto the AC800M CEX bus adjacent to the processor.
- Ensure cabinet installation complies with IP20 enclosure protection standards.
- Apply proper bus termination resistors at both ends of each PROFIBUS segment.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure module parameters and bus addressing using compatible ABB engineering software.
- Select transmission baud rates between 9.6 and 12,000 kbit/s based on network length.
- Configure field devices and verify slave station addresses on the master network.
TECHNICAL INFORMATION
Compatibility
- Compatible with ABB AC800M controller communication expansion bus.
- Interoperable with standard PROFIBUS DP-V1 field devices and slaves.
- Connects to PROFIBUS PA instruments via external linking devices.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Catalog number 3BSE030220R1 identifies the CI854A Classic configuration kit.
- Verify system engineering compatibility before changing hardware revisions.
TECHNICAL INFORMATION
Compliance and Certifications
- CE Marked
- UL 508
- cULus Class 1 Zone 2 (UL 60079-15)
- RoHS EN 50581:2012
- WEEE Directive 2012/19/EU
TECHNICAL RESOURCES
Documentation
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with ABB AC800M controller communication expansion bus. Interoperable with standard PROFIBUS DP-V1 field devices and slaves. Connects to PROFIBUS PA instruments via external linking devices.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What communication protocol does the CI854AK01 3BSE030220R1 support?
It supports PROFIBUS DP-V1. It also connects to PROFIBUS PA through an external linking device.
Does the CI854AK01 module support hot swapping?
Yes. The module supports hot swap maintenance directly on the active CEX bus.
How many communication channels are available on the 3BSE030220R1?
The module provides two independent channels using 9-pin female D-sub connectors.
How many CI854AK01 modules can be installed on one CEX bus?
Up to 12 communication interface units can mount on a single AC800M CEX bus.
