PRODUCT INFORMATION
Product Overview
The General Electric IC670CHS002 is an I/O terminal base designed for the Field Control system. This unit provides connection terminals for up to two Field Control input and output modules. It features a box terminal style layout supporting sixteen discrete field wiring connections. The base accommodates external field wiring conductor sizes ranging from AWG 14 to AWG 22.
The IC670CHS002 operates with a rated system control voltage of 24 VDC. Each individual connection point sustains a maximum continuous current load of 10 Amps. DIN rail mounting enables rapid hardware integration inside standard electrical control enclosures. Recommended terminal screw tightening torque is 4.5 inch-pounds for firm electrical contact. The operating ambient temperature envelope spans from 0 degrees Celsius to 55 degrees Celsius.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.13 lbs (0.51 kg) |
|---|
| Terminal Type | Box terminals |
|---|
| Wire Size | AWG #14 to AWG #22 |
|---|
| Mounting Style | DIN rail mountable |
|---|
| Operating Temperature | 0°C to 55°C |
|---|
| Number of I/O Points | 16 I/O Points |
|---|
| Rated Voltage | 24 VDC |
|---|
| Compatible Modules | GE Fanuc Field Control Input/Output modules |
|---|
| Current per Terminal | 10 Amps (max) |
|---|
| Terminal Torque | 4.5 in/lbs. |
|---|
| Base Type | Box-style terminal base |
|---|
| Module Capacity | 2 I/O modules |
|---|
TECHNICAL INFORMATION
Features
- Accommodates up to two GE Field Control series I/O modules.
- Features sixteen field wiring termination points using box-style terminals.
- Rated for 24 VDC nominal operating control voltage.
- Handles a maximum current rating of 10 Amps per individual terminal.
- Accepts field wire gauges from AWG 14 down to AWG 22.
- Mounts directly onto standard industrial DIN rail systems.
- Requires 4.5 in/lbs tightening torque for wiring connections.
TECHNICAL INFORMATION
Connections / Interfaces
- Box-style terminals supporting sixteen total I/O point terminations.
- Compatible with wire cross-sections from AWG 14 to AWG 22.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the terminal base onto a rigid DIN rail within a clean electrical enclosure.
- Strip wiring cleanly and insert conductors sized between AWG 14 and AWG 22.
- Tighten each box terminal screw to exactly 4.5 inch-pounds of torque.
- Ensure ambient operating temperatures remain strictly between 0°C and 55°C.
TECHNICAL INFORMATION
Compatibility
- Engineered for use with General Electric Field Control input and output modules.
- Supports dual-module configurations across its 16-point field terminal block layout.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSEngineered for use with General Electric Field Control input and output modules. Supports dual-module configurations across its 16-point field terminal block layout.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What modules can be installed on the GE IC670CHS002 base?
The base supports up to two General Electric Field Control series I/O modules across sixteen terminal points.
What wire sizes are supported by the IC670CHS002 box terminals?
The box-style terminals accept wire sizes ranging from AWG 14 to AWG 22.
What is the maximum current capacity per terminal on the IC670CHS002?
Each terminal point supports a maximum continuous electrical current of 10 Amps at 24 VDC.
