PRODUCT INFORMATION
Product Overview
The Allen-Bradley 5069-RTB4-SCREW CompactLogix Terminal Block provides field wiring connections for compatible system modules. It features four screw terminal points arranged on a removable terminal block design. This removable assembly simplifies cabinet wiring, maintenance, and module replacement. The unit operates with a maximum rated voltage of 300 VAC. It supports continuous operating currents up to 10 A.
This component accepts solid or stranded copper wire sized between 0.5 and 1.5 mm². That range corresponds to conductor gauges from 22 AWG to 16 AWG. Field wiring requires insulation rated for 105 °C (221 °F) or higher. The maximum allowed wire outer diameter is 3.5 mm (0.14 inches) including insulation. Secure fastening requires a strip length of 12 mm and a torque of 0.4 N·m.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Terminal Points | 4 points |
|---|
| Terminal Type | Screw terminal |
|---|
| Terminal Block Type | Removable block |
|---|
| Maximum Voltage | 300 VAC |
|---|
| Maximum Current | 10 Amps |
|---|
| Wire Size | 0.5 to 1.5 mm² (22 to 16 AWG) |
|---|
| Wire Type | Solid or stranded copper |
|---|
| Wire Temperature Rating | 105 °C (221 °F) or greater |
|---|
| Maximum Wire Diameter | 3.5 mm (0.14 in.) including insulation |
|---|
| Wire Strip Length (mm) | 12 mm |
|---|
| Terminal Torque | 0.4 N·m (3.5 lb.in) |
|---|
TECHNICAL INFORMATION
Features
- Four screw-clamp termination points for field wiring connections
- Removable terminal block design for simplified module service and replacement
- Rated for operational limits up to 300 VAC and 10 A current
- Accepts solid or stranded copper conductors from 0.5 to 1.5 mm² (22 to 16 AWG)
- Accommodates high-temperature wire insulation rated for 105 °C (221 °F) or higher
TECHNICAL INFORMATION
Connections / Interfaces
- Four screw-clamp terminal points
- Accepts 0.5 to 1.5 mm² (22 to 16 AWG) copper wire
TECHNICAL INFORMATION
Installation Guidelines
- Strip conductor insulation to an exact length of 12 mm before insertion.
- Ensure wire outer diameter does not exceed 3.5 mm (0.14 in.) including insulation.
- Tighten terminal clamping screws to 0.4 N·m (3.5 lb·in) of torque.
- Use solid or stranded copper wire rated for at least 105 °C (221 °F).
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the recommended tightening torque for the 5069-RTB4-SCREW?
Tighten each terminal screw to 0.4 N·m (3.5 lb·in) for a secure conductor connection.
What wire gauges does the 5069-RTB4-SCREW terminal block accept?
The block accepts solid or stranded copper wire sized from 0.5 to 1.5 mm² (22 to 16 AWG).
What is the required wire strip length for this terminal block?
Strip wire ends to 12 mm before inserting them into the screw terminals.
What are the maximum voltage and current ratings for the 5069-RTB4-SCREW?
The terminal block has maximum ratings of 300 VAC and 10 A.
