PRODUCT INFORMATION
Product Overview
The Allen-Bradley 1783-ETAP2F Stratix EtherNet/IP Tap is an industrial communication interface component. It provides one copper Ethernet port and two fiber optic ports. All network ports operate at 10/100 Mbps communication speed. The copper port supports auto-negotiation in full or half duplex modes. The dual fiber optic ports allow long-distance communication with high noise immunity. The device functions independently and does not connect to a backplane.
This open-style module requires an external nominal 24V DC power source. The acceptable supply input range is 20.4 to 27.6V DC. Maximum power consumption is 6.24 Watts with 260 milliamps current draw at 24V DC. It supports mounting on a DIN rail or direct panel attachment. Integrators can deploy the tap in horizontal or vertical orientations. Enclosure installation requires specific clearance distances for proper airflow and cable routing.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| UPC | 612598594436 |
|---|
| Weight | 0.63 lbs (0.28 kg) |
|---|
| Status indicators | OK / Link1 / Link 2 indicators |
|---|
| Power Supply Input | 20.4…27.6V DC |
|---|
| Installation Orientation | Horizontal / Vertical |
|---|
| Installation | DIN Rail / Panel Mount |
|---|
| Supported Topologies | Linear, Star |
|---|
| Transmission speed | 10/100 Mbps |
|---|
| Fiber Optic Connector | LC Connector |
|---|
| No. Of Fiber Ports | Two (2) |
|---|
| No. of Copper Ports | One (1) |
|---|
| Total No. of Ports | Three (3) |
|---|
| Module Type | Ethernet Tap Module |
|---|
| Fiber ports | 2 |
|---|
| RJ45 port | 1 |
|---|
| Tap type | Dual port fiber |
|---|
| Input voltage | 24 Volts DC |
|---|
| Peak current consumption | 260 milliamps |
|---|
| Peak power consumption | 6.24 Watts |
|---|
| Operating temperature | -25 to 60 degrees Celsius |
|---|
TECHNICAL INFORMATION
Features
- One 10/100 Mbps RJ45 copper interface with auto-negotiation and duplex mode support
- Two 100Base-FX multimode fiber optic interfaces using IEC 61754-20 LC connections
- Optical transmission at 1310 nanometer wavelength supporting distances up to 2 kilometers
- External power operation requiring 20.4 to 27.6V DC input without backplane requirements
- Flexible mounting options supporting DIN rail or direct panel mounting orientations
- Integrated diagnostic status indicators for OK, Link 1, and Link 2 conditions
- Support for industrial network topologies including linear and star architectures
TECHNICAL INFORMATION
Applications
- Long-distance industrial network links extending up to two kilometers over multimode fiber
- Noise-immune Ethernet connections across high electrical disturbance manufacturing areas
- Network tapping and topology integration in linear and star EtherNet/IP architectures
TECHNICAL INFORMATION
Connections / Interfaces
- One RJ45 copper Ethernet port supporting 10/100 Mbps transmission
- Two 100Base-FX fiber optic interfaces equipped with IEC 61754-20 LC connectors
- External DC power input terminals operating over 20.4 to 27.6V DC
TECHNICAL INFORMATION
Installation Guidelines
- Mount the unit on standard DIN rail or fasten directly to an enclosure backplate.
- Install the tap in either a vertical or horizontal orientation inside an enclosure.
- Maintain at least 7.62 cm of clearance on the bottom of the device.
- Maintain at least 2.54 cm of clearance on all remaining module sides.
- Allow at least 5.08 cm for fiber entry to preserve the cable bending radius.
TECHNICAL INFORMATION
Configuration Guidelines
- Verify the copper RJ45 port auto-negotiates correct link speed and duplex mode.
- Inspect the integrated OK, Link 1, and Link 2 status indicators after power-up.
TECHNICAL INFORMATION
Compatibility
- EtherNet/IP industrial automation networks using star or linear topologies
- Multimode optical fibers of 50/125 micrometer and 62.5/125 micrometer specifications
- Third-party Ethernet devices and Encompass partner modules
TECHNICAL INFORMATION
Compliance and Certifications
- CE
- C-Tick
- Ex
- KC
- Class A emissions rating
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSEtherNet/IP industrial automation networks using star or linear topologies Multimode optical fibers of 50/125 micrometer and 62.5/125 micrometer specifications Third-party Ethernet devices and Encompass partner modules
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What power input does the 1783-ETAP2F tap require?
The tap requires an external DC supply between 20.4 and 27.6V DC. Nominal operating voltage is 24V DC.
What network port configuration does the 1783-ETAP2F provide?
The module includes one RJ45 copper Ethernet port and two 100Base-FX LC multimode fiber optic ports.
What is the market reference price for the 1783-ETAP2F?
Observed market reference pricing spans $1590.00 to $1760.00 USD. Figures are indicative reference values, not final quotations.
