PRODUCT INFORMATION
Product Overview
The Bently Nevada 330180-90-00 is a 3300 XL 8mm Proximitor Sensor designed for industrial monitoring systems. It interfaces with one 3300-series 5 mm or 3300 XL 8 mm probe and extension cable. The unit is configured for a 9-meter total system length. It features panel mount installation and comes with the option 00 configuration where agency approvals are not required.
This sensor provides an incremental scale factor of 7.87 V/mm across a 2.0 mm linear range. Its linear range spans approximately 0.25 to 2.3 mm and -1 to -17 VDC. Electrical excitation requires an input supply voltage of -17.5 to -26 VDC with 12 mA maximum current draw. The housing is cast A308 aluminum with an operating temperature rating from -52 to +100 °C.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Sensor input | One 3300-series 5 mm or 3300 XL 8 mm probe and extension cable |
|---|
| System length | 9 Meters |
|---|
| Mounting | Panel mount |
|---|
| Agency approval option | 00 — approval not required |
|---|
| Supply voltage | -17.5 to -26 VDC; -23 to -26 VDC with barriers |
|---|
| Maximum current | 12 mA |
|---|
| Supply sensitivity | Less than 2 mV output change per volt of input change |
|---|
| Output resistance | 50 ohm |
|---|
| Linear range | 2.0 mm; approximately 0.25–2.3 mm and -1 to -17 VDC |
|---|
| Recommended gap | -9 VDC; approximately 1.27 mm |
|---|
| Incremental scale factor | 7.87 V/mm (200 mV/mil) ±6.5% for a 9 m system |
|---|
| Straight-line deviation | Less than ±0.038 mm from 0 to +45 °C |
|---|
| Frequency response | 0–10 kHz, +0/-3 dB, with up to 305 m field wiring |
|---|
| Minimum target diameter | 15.2 mm |
|---|
| Housing | A308 aluminum |
|---|
| Weight | 0.246kg |
|---|
| Operating temperature | -52 to +100 °C |
|---|
| Storage temperature | -52 to +105 °C |
|---|
| Country of Manufacture | United States(USA) |
|---|
| Total system length | 9.0 metres |
|---|
| Mounting option | Panel mount |
|---|
| Option for Agency Approval | Not Required |
|---|
TECHNICAL INFORMATION
Features
- Configured for a total system length of 9 meters.
- Direct linear output spanning 2.0 mm with 7.87 V/mm incremental scale factor.
- Frequency response of 0 to 10 kHz with up to 305 m field wiring.
- Panel mount housing constructed from A308 aluminum.
- Operating temperature range of -52 °C to +100 °C.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the unit to a flat panel surface using the panel mount base.
- Connect to one 3300-series 5 mm or 3300 XL 8 mm probe and extension cable.
- Observe a minimum target diameter of 15.2 mm during target preparation.
- Set the nominal recommended gap to -9 VDC or approximately 1.27 mm.
TECHNICAL INFORMATION
Configuration Guidelines
- Verify that system scale factor is set to 7.87 V/mm (200 mV/mil).
- Ensure input supply voltage remains between -17.5 and -26 VDC.
- Maintain input supply voltage between -23 and -26 VDC when using barriers.
TECHNICAL INFORMATION
Compatibility
- 3300-series 5 mm probes
- 3300 XL 8 mm probes
- Matching 9-meter system extension cables
TECHNICAL INFORMATION
Compliance and Certifications
- Option 00 designates that agency approvals are not required.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELS3300-series 5 mm probes 3300 XL 8 mm probes Matching 9-meter system extension cables
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What system length is calibrated for the Bently Nevada 330180-90-00?
The 330180-90-00 is calibrated for a total electrical system length of 9 meters.
What input power is required by the 330180-90-00 proximitor sensor?
It requires a supply voltage of -17.5 to -26 VDC and consumes a maximum current of 12 mA.
What is the recommended gap voltage for the 330180-90-00 sensor?
The recommended nominal gap voltage is -9 VDC, which corresponds to approximately 1.27 mm.
