PRODUCT INFORMATION
Product Overview
The ABB ACS550-PC-015A-4 is an ACS550 series AC drive configured with a circuit-breaker disconnect. This variable frequency package operates across a three-phase input voltage range from 380 to 480 VAC. It provides a rated output current of 15.4 A. The drive delivers 10 hp or 7.5 kW motor power output for industrial equipment.
Housed in a NEMA 1 and UL Type 1 enclosure, this drive utilizes an R2 frame size base unit. The enclosure incorporates an external door-mounted operating handle with lockout capability in the OFF position. Cooling operates via an internal fan that directs airflow vertically from bottom to top. Complete unit physical dimensions measure 829 mm high, 198 mm wide, and 295 mm deep.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Package construction | Drive with circuit-breaker disconnect |
|---|
| Input phases | 3 |
|---|
| Input-voltage range | 380–480 VAC |
|---|
| Rated motor power | 10 hp |
|---|
| Rated motor power metric | 7.5 kW |
|---|
| Rated output current | 15.4 A |
|---|
| Enclosure | NEMA 1 / UL Type 1 |
|---|
| Base-drive frame | R2 |
|---|
| Disconnect operating handle | External door-mounted |
|---|
| Handle lockout | Padlockable in OFF position |
|---|
| Product width | 198 mm |
|---|
| Product height | 829 mm |
|---|
| Product depth | 295 mm |
|---|
| Typical maximum enclosure weight | 17 kg |
|---|
| Cooling orientation | Internal fan, bottom-to-top airflow |
|---|
TECHNICAL INFORMATION
Features
- Integrated circuit-breaker disconnect package within standard assembly.
- Rated for 380 to 480 VAC three-phase input power.
- Delivers 15.4 A continuous output with 10 hp or 7.5 kW rating.
- External door-mounted disconnect handle padlockable in the OFF position.
- Built inside a protective NEMA 1 and UL Type 1 enclosure.
- Utilizes base-drive frame size R2 architecture.
- Forced bottom-to-top air cooling through an internal fan.
TECHNICAL INFORMATION
Connections / Interfaces
- Three-phase AC input supply connection rated for 380 to 480 VAC.
- Three-phase output terminals supplying up to 15.4 A rated current to the motor.
- Integrated circuit-breaker disconnect terminals for incoming power isolation.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the unit upright on a flat vertical surface to maintain proper internal airflow.
- Ensure adequate clearance above and below the enclosure for the bottom-to-top fan path.
- Verify enclosure weight of approximately 17 kg prior to wall or bracket mounting.
- Lock the door-mounted operating handle in the OFF position during servicing.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the rated motor capacity of the ABB ACS550-PC-015A-4?
The drive is rated for 10 hp or 7.5 kW with a continuous output current of 15.4 A.
What disconnect mechanism is integrated into the ACS550-PC-015A-4?
The package includes a circuit-breaker disconnect with an external door-mounted handle that is padlockable in the OFF position.
What base frame size does the ACS550-PC-015A-4 use?
The unit is built around the ABB ACS550 frame size R2 base drive.
What are the dimensions and enclosure rating of this drive?
It measures 829 mm high, 198 mm wide, and 295 mm deep in a NEMA 1 / UL Type 1 enclosure.
